Mackie CFX SERIES Bedienungsanleitung PDF herunterladen (Seite 17)

AUX MASTER SEND

Aux send signals are derived by each

channel’s

AUX

knob, mixed together, then

sent through this

AUX MASTER SEND

knob.

Turned fully up, it provides 15 dB of additional

gain, the center “

” mark is unity gain, and

fully down is off.

Typically, when the talent (or lack thereof)

wants a louder monitor mix, this is the knob to

crank up — watch out for feedback!

EFX 1 MASTER SEND

Effects send signals are derived by each

channel’s

EFX 1 (EXT)

knob, mixed to-

gether, then sent through this

EFX 1 MASTER

SEND

knob. Turned fully up, it provides 15 dB

of additional gain, the center “

” mark is unity

gain, and fully down is off.

Being that this controls only post-fader

sends destined for outboard effects devices,

you’ll typically set this knob near the “

” mark

and then leave it alone.

EFX 1 RETURN

Stereo signals come through the

EFX 1

RETURN

and continue on to the

MAIN MIX

Fader . They contain the effects’ “wet”

signals to be mixed together with the channels’

“dry” original signals. Turned fully up, it pro-

vides 15 dB of additional gain, the center “

”

mark is unity gain, and fully down is off.

Being that this controls only the return sig-

nals of external effects, with their levels

already determined by the channels’

EFX 1

(EXT)

knob, you’ll typically set this knob

near the “

” mark and then leave it alone.

EMAC EFFECTS

PROCESSOR

FOR THE IMPATIENT:

Set

EFX 2 SEND

and

TO MAIN MIX

at the center “

” mark.

Assuming you have your

basic mix up and run-

ning, turn up the

EFX 2

(INT)

, per channel.

This feeds in individual

amounts of channel sig-

nals to the

EMAC

inputs

— you should be hearing

the effects as you do this.

Next, goof around

with the various param-

eters: Preset Select

TIME/RATE

DAMP-

ING/DEPTH

and

WIDE

. When you find

an effect you like, jot down the parameters, then

goof around some more.

To mute these effects, engage

BYPASS

(or your foot switch if connected to

EFX FOOT

SWITCH

). To send these effects to the

stage monitor cues, turn up the

EFFECTS TO

MONITOR

knobs.

FOR THE CURIOUS:

EMAC™ stands for Extended Multiply and

Accumulate, which is a proprietary 32-bit digital

stereo processor developed by our Digital Engi-

neering Group. It provides 16 preset digital

effects algorithms for you to select. In addition

to the presets, there are two parameter con-

trols (

) you can adjust to change the

sound and make it unique for your particular

application.

EFX 2 SEND

This controls the signal level being sent to

the input of the

EMAC

module (and to the

EFX

SEND 2

jack). Use the

EFX 2 (INT)

controls on the individual channels to adjust

the amount of each channel’s signal you want

to go to the

EMAC

. Leave

EFX 2 SEND

set at

the center “

” position. If you find that you’re

not getting enough of the effect in the main

mix, make sure that the

TO MAIN MIX

control is turned up at least to unity (the cen-

ter detent position). It’s okay to turn up the

EFX 2 SEND

some more if you need to. Just

make sure the

ZERO LEVEL

LED never

lights more than occasionally. Read on to find

out why.

TO MAIN MIX

Stereo signals (from

STEREO EFX RETURN 2

and

EMAC EFFECTS

PROCESSOR

) come

through this

TO MAIN

MIX

knob and continue

on to the

MAIN MIX

Fader . They contain

the effects’ “wet” signals

and are mixed together

with the channels’ “dry”

original signals. Turned

fully up, it provides 15 dB

of additional gain, the

center “

” mark is unity

gain, and fully down is off.

Being that this con-

trols only the return

signals of external and

(EXT)

+15

AUX

EFX

MASTER SEND

TAPE LEVEL

MAX

PHONES LEVEL

UTILITY OUT LEVEL

BREAK SWITCH

(MUTES ALL CHANNELS)

+20

+10

EFX

RETURN

CLIP

WIDE BYPASS

100

REVERBS

DELAYS

CHORUS/FLANGE/PHASER

DAMPING

DEPTH

TIME

RATE

NORMAL

EFX

SM. ROOM

MD. PLATE

LG. PLATE

LG. HALL

GATED

REVERSE

CATHEDRAL

MD. HALL

SPRING

PHASER

DELAY 4

CHORUS

DELAY 3

DELAY 1

FLANGE

DELAY 2

+15

EFX 2 (INT) RETURN MASTERS

EFX

SEND

TO MAIN MIX

EFFECTS TO MONITOR

AUX

CUSTOM 32-BIT PRECISION

DIGITAL STEREO EFFECTS PROCESSOR

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Mackie CFX SERIES Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Mackie CFX SERIES