Mackie TT24 Bedienungshandbuch PDF herunterladen (Seite 11)

Owner’s Manual

Press the desired Aux number in the V-POT CONTROL

area and use the channel V-Pots to set the channel Aux

send levels. All 12 Aux levels for a selected channel can

be set using the Touchscreen and QuickMix knobs by

pressing the GRP/AUX QuickMix button.

Aux Routing Examples

To send mic channel 1 to all monitors:

1. Press channel 1’s SELECT button.

2. Press the GRP/AUX QuickMix button.

3. Adjust the QuickMix knobs to set each Aux level.

To set one monitor mix:

1. Press the desired Aux number button in the AUX

SENDS area.

2. Use each channel’s V-Pots to set the mix.

2.5 Effects

Four effects processors can each use one of the fol-

lowing effects: reverb, reverb through gate, mono/stereo/

ping pong delay, chorus, and ange. The default effect

sends are Aux sends 9–12 but any Aux or Matrix sends

can be used. The effect returns are on the Returns bank.

1. Press the ANLG bank button.

2. Press AUX SENDS 9 in the V-POT CONTROL area.

3. Turn channel 1’s V-Pot to 3:00 to set channel 1’s

level to Aux 9.

4. Press the EFX QuickMix button. The INTERNAL

EFX Touchscreen opens (top of Figure 2-10).

5. Touch the Edit button next to Chorus to edit its

parameters on its own screen (right of Figure 2-10).

6. Press the RTRNS bank button.

7. Speak into the mic and increase the Returns levels

(INT EFX 1L and INT EFX 1R) to set the desired

amount of effect.

Figure 2-9 AUX MASTER (top) and

6-BAND EQ (bottom) Touchscreens

Figure 2-10 Internal Effects (top) and

Chorus (bottom) screens

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

Keine Kommentare

Mackie TT24 Bedienungshandbuch Seite 11