Mackie SR244-VLZ PRO Bedienungsanleitung

SR24•4-VLZ PRO &SR32•4-VLZ PROOWNER’S MANUAL

10PHONESMAIN OUTSMAIN OUTSAUX RETURNS SUB INSERTSTAPE INSTEREO CHANNELSTAPE OUTSUBOUTSMAIN INSERTSTALKBACK2LR L1234LRLR12LRLRLR22LR242123LRLR3456 LRRL

11PHONESMAIN OUTSMAIN OUTSAUX RETURNS SUB INSERTSTAPE INSTEREO CHANNELSTAPE OUTSUBOUTSMAIN INSERTSTALKBACK2LR L1234LRLR12LRLRLR22LR242123LRLR3456 LRRL

12PHONESMAIN OUTSMAIN OUTSAUX RETURNS SUB INSERTSTAPE INSTEREO CHANNELSTAPE OUTSUBOUTSMAIN INSERTSTALKBACK2LR L1234LRLR12LRLRLR22LR242123LRLR3456 LRRL

13PHONESMAIN OUTSMAIN OUTSAUX RETURNS SUB INSERTSTAPE INSTEREO CHANNELSTAPE OUTSUBOUTSMAIN INSERTSTALKBACK2LR L1234LRLR12LRLRLR22LR242123LRLR3456 LRRL

14PATCHBAYThis is where everything gets plugged in: microphones, line-level instruments, effects devices,headphones and the ultimate destination(s): P

153. INSERTWith nothing plugged into this jack, thechannel’s signal goes straight through the mic/line preamp to the channel strip. With an ex-ternal

165. TAPE OUTUse these stereo jacks to capture the entireperformance to tape. The signal at these jacksis the main mix, post-MAIN INSERTS (13) andpost

179. STEREO AUX RETURNSPatch the outputs of external parallel ef-fects devices (reverb, delay, etc.) to theseinputs.When connecting a mono device (jus

1818. PHONESThe stereo signal from each of these identi-cal outputs is a high-current version of thesignal from CONTROL ROOM OUT (11). Con-nect TRS he

19CHANNEL STRIP FEATURESAUX SEND: (26 and 27)26. AUXThese knobs tap a portion of eachchannel signal and send it out, via theAUX SENDS (10) jacks, to a

2CAUTION AVISRISK OF ELECTRIC SHOCK DO NOT OPENRISQUE DE CHOC ELECTRIQUENE PAS OUVRIRCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COV

20EQ: (28 through 34)The mixer has low shelving, midpeaking and high shelving EQ. “Shelv-ing” means that the circuitry boosts orcuts all frequencies p

2135. THIS OL’ LEDThis LED represents a bad thing: If achannel’s OL LED lights up, its signal is toohot, and subsequent circuitry may overload(clip).

22MASTER SECTION FEATURESIn the master section, signals leaving thechannel strips are mixed, manipulated andsent to the outputs in the patchbay. Addit

23STEREO AUX RETURNS: (48 to 52)48. STEREO AUX RETURNSHaving entered through the STEREO AUXRETURNS (9) jacks, effects returns are con-trolled by these

24SUBGROUPS: (56 through 60)56. AIRAIR is a high frequency peaking EQ cen-tered at 16kHz. Turned fully up, these controlsprovide 10dB of boost and ful

2560. SUBGROUP FADERSThese faders provide 10dB of gain fully up,unity gain at the “U” label and are effectivelymuted fully down. Each fader is the mas

2670. PHONES/C-R LEVELAfter the MAIN MIX FADER (72), the mainmix is sent to the MAIN OUTS (12) (16) andMONO MAIN OUT (14). It is also sent throughthis

27ImpedancesMic preamp input 1.5kΩAll other inputs >10kΩAll outputs 120ΩEqualizationLo EQ Shelving 80Hz ±15dBMid EQ(mono ch)Peak 100–8kHz ±15dBHi E

28••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

29GAIN PATH DIAGRAM — (all levels in dBu)level up +200000000000max out +22XLR max out +28max out +22max out +22+22 max in+22 max in45dB gain15dB loss0

3INTRODUCTIONThank you for choosing a Mackie Designsprofessional sound reinforcement mixer! The24•4-VLZ PRO and 32•4-VLZ PRO areequipped with our new

30Power• Our favorite question: Is the POWER (20)switch on?• Turn off the power from the wall, unplugthe power cord and check the fuse (22).TROUBLESHO

31COLOPHONManual composed, for the most part, by JeffGilbert. It was created in complete darkness,which gave him a whopping headache. Hethen read it o

4ABOUT THIS MANUALThe stuff you MUST read:First, you must read and follow all the safetyinstructions on page 2.Before you get to work, please read the

5CONTENTSSAFETY INSTRUCTIONS... 2INTRODUCTION ... 3ABOUT THIS MANUAL ...

6QUICK STARTINSERT INSERT INSERT INSERT INSERT INSERT INSERTMIC 20TAPE OUTTAPE INTALK BACKMICRRR(MONO)4LLL321LCONTROL ROOM OUTMAIN INSERTS3342311LLRRR

7SR24•4-VLZPROdB302010OO405055U6010dB302010OO405055U6010dB302010OO405055U6010dB302010OO405055U6010dB302010OO405055U6010dB302010OO405055U6010dB302010OO

8MAKE THE CONNECTIONS:1. Make sure your amplifiers are turned offbefore making any connections.2. Connect speakers to your amplifier’soutputs (unless,

9ch. device input insert assignment1 kick mic gate submix 12 snare mic gate submix 13 hi hat mic submix 14 tom 1 mic gate submix 15 tom 2 mic gate sub